User Guide

48
To apply frames to photos:
1. While in capture mode, select Options >
Frame.
2. Highlight a frame from the list.
You can press the joystick key upward
or downward to scroll through the other
frames to view them all.
3. To select a frame, press the Enter key.
The selected frame is then displayed on
the capture screen.
4. To remove a frame, select Options >
Frame > No Frame.
While in capture mode, the volume key acts
as shortcut key to add frames. Press + or - to
scroll through frames or return to capture with
no frame.
Multi-Capture
The Multi-Capture enables multiple capture
shots,sothecameracapturesthreeorve
shots with a single click of the button.
To enable the multi-capture function:
1. While in capture mode, select Options >
Multi-Capture.
2. Select Deactivate for standard single
shots. For multi-capture shots, choose
from 4 Shot, 6 Shot, or 9 Shot.
Default Storage
Use the default storage option to set where
captured pictures are stored. You can store
capturedpictureseitherinthehandset(internal)
memory, or on a miniSD™ card if installed.
To set the storage option:
1. While in capture mode, select Options >
Default Storage.
2. Highlight Handset or Memory Card,
thenpresstheEnterkeytoconrm.
Advance Setting
UsetheAdvanceSettingoptiontocongure
image quality, white balance, EV, night mode,
shutter sound, and AC frequency. You may also
restore all factory default camera settings from
this option
Camera settings shortcuts
While in capture mode, the number keys also
act as shortcut keys for the camera settings.
Shortcut key
for frames
Capture Timer
Use the delay timer to add a delay time
between pressing the capture button and the
picture actually being captured. This can allow
enough time to take pictures of yourself.
To set the capture timer:
1. While in capture mode, select Options >
Capture Timer.
2. Select 5 sec, 10 sec, or 15 sec, or
Deactivate to turn the function off.