Asus V66 User Manual
Preface Congratulations on your purchase of an Asus V66 mobile telephone. Read this manual carefully and keep it in a safe place for future reference. Every effort has been made to ensure that the contents of this manual are correct and up to date. However, no guarantee is made regarding the accuracy of the contents, and the manufacturer reserves the right to make changes without notice.
Additional Information The use of this equipment may be subject to local rules and regulations. The following rules and regulations may be relevant in some or all areas. FCC Regulations This model phone complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. This device complies with Part 15 of the FCC Rules.
European Notice Compliance with these directives implies conformity to the following European Standards: • 1999/5/EEC Radio & Telecommunication Terminal Equipment Directive (R&TTE) EN 301 511 • Specific Absorption Rate (SAR) Standard: EN 50360, EN 50361 • 73/23/EEC Low Voltage Directive (LVD) Standard: EN 60950:2000 • 89/336/EEC Electromagnetic Compatibility (EMC-Directive) Standard: EN 301489-1/7 • The manufacturer cannot be held responsible for modifications made by the user and the consequences thereof,
While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of tap://www.fcc.
Safety Warnings Read the following safety warnings carefully before using your cell phone. • Switch off your cellular telephone when in an aircraft. The use of cellular telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt cellular networks, and may be illegal. Failure to observe this instruction may lead to suspension or denial of cellular telephone services to the offender, legal action or both. • Do not use the phone or phone equipment when at a refueling point.
Contents Preface About this manual Additional Information FCC Regulations European Notice RF Exposure Information (SAR) Proper Disposal Safety Warnings Welcome Package Contents Overview Specifications Menu Map Inserting the SIM card, mini SD card, and battery Getting Started Charging the battery Turning the phone on/off Function Keys Unlocking the keypad Standby Mode Using the Menu Text Entry Connecting to a Computer Calls Making a call Answering a Call i i ii ii iii iii iv v 1 1 2 2 4 7 7 8 8 9 11 12
Manner 32 Settings 33 Phone Settings Display Settings Tone Settings Call Settings Network Settings Security Settings Factory Settings Camera Taking Photos Viewing and Managing Photos Photo Capture Settings Recording Videos Viewing and Managing Videos Video Capture Settings Media Center Audio Player FM Radio Java Games Melody Composer Organizer Alarm Calendar Tasks List Calculator 33 35 36 37 39 40 42 43 43 43 44 46 46 47 49 49 50 51 52 52 54 54 54 55 55 World Clock Voice Recorder Image Editor St
Welcome Congratulations on your purchase of an Asus V66 cell phone. The following illustration displays the package contents of your new phone.
Overview The V66 is a stylish and fashionable new phone from Asus, with all the functions and utilities to make it a useful tool in today’s mobile world. The V66 comes equipped with a built-in camera, MMS/SMS messaging capability, organizer, java games, audio player, WAP, GPRS, and a mini SD card slot. In addition to the internal 32 MB phone memory, the mini SD card* provides additional memory where you can store your contact information, messages, text, graphics, and audio files.
Specifications System supported GSM900/1800/1900, GPRS Class B/Multi-Slot Class 10 Size 99.8 x 43.8 x 18.7 mm 90g Battery 720 mAh Li-ion Standby Time 200 hours Talk Time 2.5 ~ 5 hours Color Silver, Orange, Blue (available colors may vary in different regions) Display 1.8-inch, 256K colors, TFT, 128 x 160 Camera Welcome Weight 300K pixel CMOS Supports video recording 4/6/9 continuous shots WAP Supports WAP 1.2.1 and WAP 2.0 Java Supports J2ME (CLDC + MiDP 1.0.
Menu Map Network • S ervice Provider • WAP • Data Account • • Messages • SMS • MMS • Chatting Rooms • Email • Voice Mail • Cell Broadcast • Input Methods Manner 4 Settings • Phone Settings Date / Time Power On/Off Timer Input Methods Language Default Encoding Shortcut Greeting Text Speed Dial Auto Update Firmware Upgrade • Display Settings Themes Wallpaper Screen Saver Show Date and Time Show Owner Number Show Operator Name Show Manner Brightness Tone Settings Call Se
Media Center • Audio Player • FM Radio • Java • Java Settings • Games • Game Settings • Melody Composer • Tone Settings Organizer • Alarm • Calendar • Tasks List • Calculator • World Clock • Voice Recorder • Image Editor • Stopwatch Typical nWay • File Manager • Units Converter • Currency Exchange • Health Manager Calculate BMI Menstrual Welcome Camera • Capture My Album Camera Settings Image Settings Effect Frame Multi-Capture Capture Timer Default Storage Restore Default • Vid
• Settings Memory Status Default Storage Fields My vCard Calls • Missed Calls • Dialed Calls • Received Calls • Delete Call Log • Call Time • Call Cost • SMS Counter • GPRS Counter 6
Getting Started When you register with a service provider, you receive a SIM card (Subscriber Identity Module card). Your phone must have a SIM card in order to make calls. The SIM card is a computer chip that contains your phone number, phonebook information, and service provider information. Handle it with care and do not bend it or expose it to static electricity or dirt. Be sure the power to your phone is off before you insert your SIM card.
9.Replace the battery cover. Place the back cover against the phone case, then slide it upwards to lock into place. Caution: • Use only the battery recommended by the manufacturer. Using an incompatible battery with the phone may cause risk of an explosion. • Dispose of the used batteries as instructed by the manufacturer or ask your local authorities for assistance. Charging the battery 1.Connect the charger plug to a power outlet. 2.Connect the charger to the socket at the bottom of the phone.
Function Keys The following table lists the phone keys and their functions. Call key • Press to dial or answer calls. • Hold to redial the last number called. Left soft key • Press to display the menu. • Press to perform the function currently displayed in the lower left corner of the screen. • Press to move left while navigating menus. Right soft key • Press to view phone book when the phone is in idle mode. • Press to perform the function currently displayed in the lower right corner of the screen.
Front view Speaker Screen Enter key: Displays the main menu; confirms selection of a menu item Joystick: Includes up, down, right, left keys for on-screen navigation Left soft key: Displays the main menu; selects left menu items Call key: Answers a call; displays call history Left joystick key: Displays the camera menu; scrolls left through menu items, and displays previous page Up joystick key: Displays the SMS inbox; scrolls up through menu items Right soft key: Displays phone book when idle; selects
Unlocking the keypad Left view Side key: Increases or decreases the volume for calls, key tones, or playing media files. To unlock the keypad, do the following: 1.The screen shows Unlock in the lower right corner of the screen. Select this option by pressing the right soft key which is just under the word Unlock on the screen.
Standby Mode When your phone is on, but not in use, it is in standby mode. During standby mode, the upper part of the display screen shows various icons. Alarm has been set. A text message has been received. A multimedia message has been received. The SMS memory is full (blinking icon). Indicates battery charge status. Phone is using GPRS network. Phone is in roaming mode. The date and time is displayed at the lower center of the screen.
Using the Menu In the standby mode, press the left soft key to view the main menu. or the Enter key. • Use the up, down, left, and right joystick keys to move through the various menu items. • The lower left corner of the screen displays the name of the menu item currently selected while the lower right corner displays Back. Press the left soft key (situated under the name of the menu item) to select the menu item. Press the right soft key which is situated under Back to exit the menu.
Settings: Lets you adjust phone settings such as call settings, themes, shortcuts, network settings, and security settings. You can also restore all settings to their factory default from this menu. Camera: Enables you to take pictures as well as record video with your phone. You can also access all your pictures and videos from this menu item. Media Center: Consists of an audio player, FM radio, games, and a melody composer.
Key Assigned Characters .,-?!‘@:#$/_1 2 ABC2 3 DEF3 4 GHI4 5 JKL5 6 MNO6 7 PQRS7 8 TUV8 9 WXYZ9 0 0, display symbol table Choosing text entry methods From any text entry screen, such as a text message window, select Options > Input Method. Select Smart abc input (ABC for upper case abc for lower case letters or Abc for upper case followed by lower case) for entering letters one at a time. Select Smart (ABC, Abc, or abc) to let the phone predict the words you are typing.
Whenever you press a key, a list of possible characters or character combinations is created. To enter text, use the up and down joystick keys to find the character combination you want. Press the right joystick key to proceed entering the next character. If you make a mistake, press Clear. Here is an example of how to enter the word “baby” using smart text entry. 1.First press the 2 key. The letter a appears on the screen. 2.Press the 2 key again quickly to go to the next suggestion which is ba.
Calls Answering a Call Follow these steps to place a call: 1.Enter the number you wish to dial using the keypad. If you make a mistake, select Clear to delete at any time. The right soft key is just under the word Clear on the lower right screen; select this key to clear a number. 2.Press the Power/end key to cancel the call and return to standby mode. Alternately, select Abort using the right soft key to cancel the call. 3.Press the Call key to connect the call after you finish dialing the number. 4.
Canceling an Incoming Call If you would like to cancel an incoming call, press the Power/end key. Alternately, you can press the right soft key to select the Reject option to reject the call. Depending on your service provider, the caller may be transferred to your voice mail or may hear a busy signal. Diverting a Call If you want to divert an incoming call to another number, do the following: 1.When you receive the call, press Option and then select the Deflect item. 2.
To dial a number from the received or dialed call logs, follow the same procedure as for returning a missed call. Call Log Options While viewing a number from the dialed, received or missed call logs, you can select Option to view other functions as follows: • Delete: Deletes the number from the list. Deleting can create space for other numbers. • Save to Phone book: Adds the number to the phonebook. • Dial: Calls the selected number. • Edit: Modifies the number.
Options During a Call When a call is in progress, you have the following options available: • Hold / Retrieve: Puts a current call on hold or retrieves a call on hold. • End: Ends a call. • New Call: Places a new call. • Phone Book: Displays the phone book menu. You can use this function to check a contact phone number during a call. • SMS: Displays the messages menu. This is convenient in loud speaker mode if you want to send an SMS during a call. • Sound Recorder: Starts recording the conversation.
Phonebook Adding Contacts Adding a New Entry Use the Add function to add a new contact to your phonebook. Follow these steps to add a new entry: 1. From the main menu, select Phonebook > Add, OR From the idle screen, enter a telephone number using the number keys, then press the left soft key to select Save. 2. Select the storage location. Select SIM or Handset then press the enter key.
Search Entry Use the Search Entry function to search for a specific entry. Follow these steps to use the search entry function: 1. From the main menu, select Phonebook > Search Entry. The data entry screen opens. 2. Enter a search term using the keypad. You don’t need to type a whole word. For instance, if you are looking for the entry “office,” you may want to type simply “off.” 3. Press the Enter key. 4.
Caller Groups You can delete individual contacts using the Delete function. To delete individual contacts: 1. From the main menu, select Phonebook > Delete, OR From the idle screen press the right soft key to open the phonebook. Select Options with the left soft key , then select Delete. The list of contacts in the phonebook appears. 2 Select a contact to delete, then select Delete. You can separate contacts into groups to identify them.
This option determines what the phone does when someone from the chosen caller group calls the phone. To change the ringtone: 1. Select the caller group to modify as described in the previous procedures. 2. Use the joystick to select the ringtone option (third in the list). 3. Use the right and left joystick option to cycle through the available ringtones. Each tone is played as it is displayed. The chosen ringtone will sound when someone from the current caller group calls the phone.
NOTE: SOS numbers vary according to region and service provider. Please contact your service provider for details about SOS numbers. The phonebook fields include additional contact information, such as Fax Number, E-Mail Address, Incoming Ringtone, etc. You can choose to deactivate these fields for all contacts if this simplifies the phonebook for you. You can later reactivate the fields if desired. To edit the phonebook fields: 1. From the main menu, select Phonebook > Settings > Fields.
Messages Read this section to learn how to use SMS, and MMS messaging features of your new phone. You can even send e-mail and use text chat. This section also covers voice mail features, broadcasting messages, and setting the preferred text input. SMS An SMS message is a simple text message. SMS messages can be sent and received with your phone. Composing an SMS Message 26 To compose an SMS message: 1. From the main menu, select Messages > SMS > Write Message. 2.
To edit a common words phrase: 1. From the main screen, select Messages > SMS > Common Words. The common words list is displayed. 2. Use the joystick to highlight a common words phrase to edit, then press the enter key to confirm. 3. Use the joystick to highlight the Edit optionto edit the wording, or selct the delete option to delete it completely. The edit screen displays the existing common words phrases and gives you the option to change them.
the network of your preference. To set the preferred bearer option: 1. From the main menu, select Messages > SMS > Settings > Pref Bearer. 2. Select the network option you prefer. Select Pref GMS or Pref GPRS to set a preference, or GPRS Only or GMS only if you want to use only one kind of network. Press the Enter key to confirm your selection. SMS Counter There is an SMS counter which can keep a log of the number of SMS messages sent and received. To view the SMS counter: 1.
Viewing an MMS Message Some MMS messages are longer than the screen. To move up or down a page, press and hold the up or down joystick key. Using Templates There are templates stored on your phone which contain text, images, and sound. You can create MMS messages based on templates stored on your phone. You can also edit any of the existing templates. To use a template: 1. From the main menu, select Messages > MMS > Templates. A list of available templates appears. 2.
2. Use the joystick to highlight a chatroom from the list, the press the enter key to confirm. 3. Press the enter key to display the chatroom information. 4. Enter a nickname and destination number if required. 5. Press the left soft key to save your new settings. 6. Use the joystick key to select the Start New option, then press the Enter key to confirm. The chat session begins. E-mail You can use the phone to send e-mail messages. Before you can use the e-mail feature you must set up an account.
confirm. 3. Press the enter key to edit the voice mail details. 4. Type in the voice mail number. 6. Use the joystick to select, add, edit, or delete channels. Input Methods The preferred input setting lets you define the default input method when writing messages. Note: Voice mail is a service provider feature. Contact your service provider for voice mail numbers and settings or other voice mail assistance. To set the preferred input method: 1. From the main menu, select Messages > Input Methods. 2.
Manner The phone can be set to behave in a number of manners. Each manner is designed to be used in a particular environment. For instance, if you are in a meeting you may want your phone to alert you silently when a call comes in. To select a manner: 1. From the main menu, select Manner. A list of manners appears. 2. Highlight a manner from the list, then press the enter key to confirm. 3. Press the enter key a second time to activate the selected manner.
Settings Phone Settings To access the phone setup menu: 1. From the main menu, select Settings > Phone Settings. 2. A list of phone settings is displayed. Date/Time The Settings > Phone Settings> Date/Time option enables you to set the time, and also set a time zone by selecting your location and a format for displaying dates. In the submenu, use the joystick to move between fields and the enter key to change a setting.
Shortcut To edit the shortcut list: 1. From the main menu, select Settings >Phone Settings> Shortcut. A list of current shortcuts is displayed. 2. Use the joystick to highlight a number in the shortcut list. You can replace this number with a different menu item. 3. Press the left soft key to select the Settings selection. A list of available menu items is displayed. 4. Highlight an item from the list using the joystick and press the enter key to confirm.
If an error occurs, an error message appears. If this occurs, refer to the following list of error messages and their solutions. 1. Message: “Not enough voltage to update!”: Solution: Charge the battery so at least two bars appear in the battery icon in the idle screen. 2. Message: “Versions of file and handset do not match!” 3. Message: “File content error!” 4. Message: “Invalid file format.” Solution for error messages 2 – 4: The downloaded file was not an upgrade for your phone.
3. Use the joystick to highlight an image to use as wallpaper and press the enter key to confirm. You can also choose your own picture as wallpaper. Instead of choosing a Default wallpaper, select Custom and browse to the location of the picture. Screen Saver To set the screen saver: 1. From the main menu, press Settings > Display Settings>Screen Saver. 2. Use the joystick to highlight the Settings option. 3.
Message Tone, and Key Tone. Call Settings The Call menu contains call features that control or restrict the calls you make or receive. There are also features to show or hide your number when making calls, control the time of calls, conveniently redial numbers, or select a line. Call menu features include Hide My No., Call Waiting, Call Forwarding, Call Barring, Line Switching, Call Time Reminder, Call Time Display, Auto Redial, Closed User Groups, and Call Filter.
are busy and cannot take calls. You can choose to forward all voice calls, or forward if unreachable, if calls are not answered, if busy, or divert all data calls. Select Cancel to deactivate call forwarding. Call Barring Call barring is a service available through your service provider. This service restricts different types of incoming and outgoing calls. The Settings > Call Settings> Call Barring option enables you to bar outgoing calls, incoming calls, cancel all bars, or change the barring password.
To enable call time display, select the Call Time Display option, then press the enter key to toggle the function On and Off. Auto Redial When the Settings > Call Settings> Auto Redial option is enabled, the number is redialed automatically if it fails to connect when you call the first time. To activate the Auto Redial option, select it, then press the enter key to toggle the function On or Off.
Network menu features include Network Selection, Preferred Network, Band Selection, and GPRS Connection. Preferred Network To select a preferred network: 1. Highlight the Preferred Network option, then press the enter key. 2. Highlight the desired network from the list, then select OK. NOTE: There may be only one network listed, depending on your geographic location. Higher fees may also result from using a network other than that of your service provider.
unauthorized use if the phone is stolen or used by others. NOTE: This option requires a default password from your service provider. Consult your service provider if needed. Phone Lock Code The Settings >Security Settings> Phone Lock Code option provides additional security by locking the handset. Even if the SIM card is changed, the phone cannot be used until a password is entered to unlock it. NOTE: The default password is 1234.
To change a password: 1. Highlight the Change Password option and press the enter key 2. Select the password you wish to change: PIN, PIN2, or Phonelock. 3. You are prompted to enter the old password, then enter the new password. NOTE: The default phonelock password is 1234. Consult your service provider if you have forgotten a PIN password or need further assistance with PIN passwords.
CCaC Camera The phone is equipped with a high quality camera for capturing still pictures and video. to save the Zoom Function Follow these steps to capture still pictures with your phone. 1. Press the menu button on the keypad to display the main menu screen. 2. Use the joystick to highlight the Camera icon and press the enter key to confirm. 3. Highlight the Capture option, then press the enter key to enter capture mode. 4.
2. To view an enlarged thumbnail, highlight an image and press the enter key. You can browse photos in this enlarged view using the up and down joystick keys. to display the 3. Press the left soft key Option menu. You can view, send, rename, delete, and sort photos. You can also set the default storage to handset or memory card. Photo Capture Settings The camera can be configured to capture images of different size and quality.
Effect To apply photo effects: 1. While in capture mode, select Option > Effect. A list of photo effects appears. 2. Highlight an effect from the list using the joystick and press the enter key to apply the setting. Frame Use the Add Frame option to add frames to pictures you capture. To apply frames to photos: 1. While in capture mode, select Option > Frame. 2. Highlight a frame from the list. You can use the up and down joystick keys to scroll through the other frames to view them all. 3.
Default Storage Use the default storage option to set where captured pictures are stored. You can store captured pictures either in the handset (internal) memory, or on a mini SD card if installed. To set the storage option: 1. While in capture mode, select Option > Default Storage. 2. Highlight Handset or Memory Card, then press the enter key to confirm. Restore Default Use the Restore Default option to restore all factory default camera settings. To restore default settings: 1.
3. To edit files, select Option. You can view, forward, rename, or delete files. You can also sort image files or set the default storage location. Full-Screen Mode While the video is playing, a progress bar and the time elapsed is shown at the bottom of the screen. If you wish to view the video in fullscreen mode, press the * key to toggle in and out of full-screen mode. Rewind and Fast Forward To rewind, press and hold the left joystick key. To fast forward, press and hold the right joystick key.
3. Adjust the value of a setting using the joystick left and right keys. NOTES: EV stands for exposure value. The EV option enables you to manually raise or lower the exposure value. The AC Frequency option adjusts for lighting flicker. Select the frequency of electrical current in your area. Video Settings Use the Video Settings option to set the video quality, file size limit, record time limit, turn the audio on and off, and set the encode format. To open the video setting menu: 1.
Media Center The phone is equipped with a high quality audio player for digital music files. To start the audio player 1. Press the menu button on the keypad to display the main menu screen. 2. Use the joystick to highlight the Media Center icon. 3. Press the enter key to display the media center menu. 4. Use the joystick to highlight the Audio Player option from the list and press the enter key to confirm. The audio player opens. 5.
Editing Music Files • You can play a file, view file details, set a file as a ringtone, add or remove files, or control other settings related to the playlist, the list of songs played by the audio player. • To edit music files: 1. From the main menu, select Media Center > Audio Player > List. 2. Highlight a file, then select Option. A list of editing options appears. To add or delete files, you must set Option > Settings to Deactivate as described below.
FM Radio Options The channel list contains preset frequencies. To access the channel list: 1. Start the radio, then select Option > Channel List. The channel list is displayed. 2. Highlight any of the preset channels in the list and press the enter key to confirm, OR Press a number key. The number keys act as shortcuts to preset stations. 3. Select the Play option to play. Select Edit to display an edit screen. 4.
2. Highlight a Java game from the list and press the enter key to launch the game. 2. Highlight an option to change. 3. Use the right and left joystick keys to change settings. Java Settings You can alter a number of Java settings and view the resources available to Java applications using the Java Settings option. To open the Java Settings menu: 1. From the main menu, select Media Center > Java Settings. 2. Highlight an option to change. 3. Use the right and left joystick keys to change the setting.
You can play your tune at any time from the Option menu. From the Option menu, you can also select an instrument to play your tune, adjust the speed and save your work. Media Center • If you would like to edit your tune by turning off the vibration or screen on / off effects, select the effect on the staff, then press the down joystick key to deactivate it. An “x” then appears on the effect. Press the up joystick key to reactivate.
Organizer The organizer menu gives you access to a number of features including alarms, calendar, task list, calculator, world clock, sound recorder, image editor, stopwatch, file manager, units converter, currency converter, and health manager. Alarm The phone can function as an alarm clock. Up to three alarms can be programmed. To program an alarm. 1. From the main menu, select Organizer > Alarm. A list of alarms is displayed. 2. Highlight an alarm to program then press the enter key to confirm.
Tasks List To access the Tasks List: 1. From the main menu, select Organizer > Tasks List. Stored tasks are then displayed. 2. Select Add to add a new task. There are fields for date, time, content, and alarms. Select date and time fields using the joystick keys. Select Content and press the enter key. A text entry window opens to enter information about the task(s) for this date. Select Save to save content. The Alarm Notify field activates or deactivates the alarm.
• mc Select mc then press the Enter key to clear memory. • mr Select mr to retrieve and enter the number in memory. The number stored in memory appears in [brackets] at the top of the screen. Note that most of the functions are selected with the joystick alone, with no need to press OK or the enter key. For example, compute 239 + 1,238 + 439 as follows: 1. Enter 239 with the number keys. 2. Press the up joystick key once to select the + function. 3. Enter 1,238 with the number keys. 4.
Image Editor Stopwatch Use the Image Editor to create and edit images. The phone includes a stopwatch function. 5 There are two styles of stopwatch to choose from: Typical or nWay. The Typical stopwatch is a simple timer that can be started and stopped using the enter key. The nWay stopwatch consists of four simultaneous timers that can be started by pressing the joystick up, down, left, or right. Only one timer can be running at any time. The total time appears at the top of the screen.
Typical Stopwatch Functions If you select the Typical stopwatch, you are then prompted to select one of three functions: Split Timing, Lap Timing, or Record. Split timing can time portions within a main recording. To enter a split time: 1. Press the right soft key to select Mark. The current time elapsed then appears in a list of times, while the stopwatch continues to run. 2. Select Mark again to add another split time to the list.
Units Converter You can view the files stored in the memory of the phone or on mini SD card using the file manager. The Units converter is a useful tool to convert weights and measures from imperial (pounds, feet, and inches) to metric or metric to imperial. To view the contents of a drive: 1. Open the file manager as described in the “File Manager” section of this chapter. 2. Use the joystick to highlight a drive and press the enter key to confirm. 3.
Currency Exchange The currency exchange is a useful tool to help you convert one currency to another or back again. To use the currency exchange: 1. From the main menu, select Organizer > Currency Exchange. The currency exchange is displayed. 2. Use the keypad to enter a conversion factor and press the enter key to confirm. Use the # key to enter a decimal point. 3. With the top field highlighted, use the left and right joystick keys to select the direction of conversion (e.g. 2:1 or 1:2). 4.
Network WAP Viewing Links Web links appear as colored or underlined, just as on a computer. To view a link, press the enter key. Use the WAP menu to set the homepage, bookmarks, view recent pages, enter an internet address, service inbox, and change settings. WAP Settings To open the WAP menu: 1. From the main menu, select Network > WAP. 2. Highlight an option to change. 3. Press the enter key to change the highlighted setting.
WAP Push WAP Push is a method for sending multimedia content to your phone. If your service provider offers WAP push services, you can use WAP push to receive such content as wallpaper, ringtones, or java games. The message is sent as a WAP accessible URL, or web address. Set WAP Push settings in WAP > Settings>Push Settings. Receive WAP Push content in WAP > Push Inbox. Data Account The Network > Data Account option displays a list of available network services. To view data account information: 1.
