Specifications

ASUS P5VDC-TVM SE 2-17
2.7 Power Management Setup
The Power Management Setup menu items allow you to change the settings for
the Advanced Power Management (APM) and Advanced Conguration and Power
Interface (ACPI).
Onboard Parallel Port [378/IRQ7]
Allows you to set the base address of the onboard parallel port connector.
Conguration options: [Disabled] [378/IRQ7] [278/IRQ5] [3BC/IRQ7]
Parallel Port Mode [ECP]
Allows you to set the operation mode of the parallel port.
Conguration options: [SPP] [EPP] [ECP] [ECP+EPP]
ECP Mode Use DMA [3]
Allows you to select the ECP Mode. This item becomes congurable only if the
Parallel Port Mode is set to [ECP] or [ECP+EPP].
Conguration options: [1] [3]
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
Select Menu
Item Specic Help
Enable/Disable ACPI
support for Operating
System.
: Move Enter:Select +/-/PU/PD:Value F10:Save&Exit ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F9: Optimized Defaults
ACPI Function [Enabled]
ACPI Suspend Type
[S3(STR)]
Off by Power Button
[Instant-Off]
x Resume by PCI PME Disabled
Resume by Ring
[Disabled]
Resume by USB (S3)
[Enabled]
Resume by PCI-E Device
[Disabled]
Resume by Alarm
[Disabled]
x Date (of Month) Alarm 0
x Time (hh:mm:ss) Alarm 0 : 0 : 0
Power On By Mouse [Disabled]
Power On By Keyboard [Disabled]
State After Power Failure
[Off]
2.7.1 ACPI Function [Enabled]
Allows you to enable or disable ACPI support for operating system.
Conguration options: [Enabled] [Disabled]
2.7.2 ACPI Suspend Type [S3(STR)]
Allows you to select the ACPI state used for system suspend.
Conguration options: [S1(POS)] [S3(STR)]