Specifications

5-205-20
5-205-20
5-20
Chapter 5: BIOS SetupChapter 5: BIOS Setup
Chapter 5: BIOS SetupChapter 5: BIOS Setup
Chapter 5: BIOS Setup
5.4.35.4.3
5.4.35.4.3
5.4.3
ChipsetChipset
ChipsetChipset
Chipset
The Chipset menu items allow you to change the advanced chipset
settings. Select an item then press <Enter> to display the sub-menu.
NorthBridge SiS661FX ConfigurationNorthBridge SiS661FX Configuration
NorthBridge SiS661FX ConfigurationNorthBridge SiS661FX Configuration
NorthBridge SiS661FX Configuration
NorthBridge SiS661FX Configuration
SouthBridge SiS964 Configuration
Primary Graphics Adapter [PCI]
MA 1T/2T Select [Auto]
DRAM CAS# Latency [By SPD]
DRAM Precharge Delay [Auto]
DRAM RAS# to CAS# Delay [Auto]
DRAM RAS# Precharge [Auto]
Graphic Win Size [ 64MB]
AGP Fast Write Control [Disabled]
Share Memory Size [ 32MB]
CPU Internal Thermal Control [Auto]CPU Internal Thermal Control [Auto]
CPU Internal Thermal Control [Auto]CPU Internal Thermal Control [Auto]
CPU Internal Thermal Control [Auto]
This item allows you to disable or set to auto the Intel
®
Thermal Monitoring
2 feature. Configuration options: [Auto] [Disabled]
Hyper-Threading Function [Enabled]Hyper-Threading Function [Enabled]
Hyper-Threading Function [Enabled]Hyper-Threading Function [Enabled]
Hyper-Threading Function [Enabled]
This item allows you to enable or disable the processor Hyper-Threading
Technology. Configuration options: [Disabled] [Enabled]
Primary Graphics Adapter [PCI]Primary Graphics Adapter [PCI]
Primary Graphics Adapter [PCI]Primary Graphics Adapter [PCI]
Primary Graphics Adapter [PCI]
Allows selection of the graphics controller to use as primary boot device.
Configuration options: [PCI] [AGP] [Onboard AGP]
MA 1T/2T Select [Auto]MA 1T/2T Select [Auto]
MA 1T/2T Select [Auto]MA 1T/2T Select [Auto]
MA 1T/2T Select [Auto]
Configuration options: [Auto] [MA 2T] [1T] [MA 1T]
DRAM CAS# Latency [By SPD]DRAM CAS# Latency [By SPD]
DRAM CAS# Latency [By SPD]DRAM CAS# Latency [By SPD]
DRAM CAS# Latency [By SPD]
This item controls the latency between the SDRAM read command and the
time the data actually becomes available.
Configuration options: [By SPD] [2T] [2.5T] [3T]