Specifications

2-192-19

2-19

ASUS Vintage-PE1ASUS Vintage-PE1

ASUS Vintage-PE1

5. Connect a power cable from

the power supply to the

power connector at the back

of the optical drive.

6. Connect one end of the IDE

ribbon cable to the IDE

interface at the back of the

optical drive, matching the red

stripe on the cable with Pin 1

on the IDE interface.

7. Connect one end of the audio

cable to the 4-pin connector at

the back of the optical drive.

Red stripe to pin 1Red stripe to pin 1

Red stripe to pin 1

IDE ribbon cableIDE ribbon cable

IDE ribbon cable

Power cable Power cable

Power cable

Audio cable Audio cable

Audio cable

8. Connect the other end of the IDE ribbon cable to the secondary IDE

connector (labeled SEC_IDE1) on the motherboard. See page 4-5 for

the location of this connector.

9. Connect the other end of the audio cable to the black 4-pin connector

labeled CD1 on the motherboard. See page 4-9 for the location of this

connector.