Specifications
5-30 Chapter 5: BIOS setup
5.5.4 Hardware Monitor
The items in this sub-menu displays the hardware monitor values
automatically detected by the BIOS. Select an item then press <Enter> to
display the conguration options.
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select Sub-menu F10: Save and Exit
Select Menu
Item Specic Help
Press [Enter] to set.
Hardware Monitor
Q-Fan Controller [Enabled]
Vcore Voltage [ 1.64V]
3.3V Voltage [ 3.24V]
5V Voltage [ 5.21V]
12V Voltage [ 11.71V]
CPU Temperature 57ºC
M/B Temperature 35ºC
CPU Fan speed 4265 RPM
Chassis Fan1 speed 0 RPM
Chassis Fan2 speed 0 RPM
Fan Type Select [3 Pin Fan]
Start Up Temperature(ºC) [53]
Start Up PWM [70]
Fan2 Start Up PWM [48]
Slope PWM [4 PWM/ºC]
CPU Fan Speed warning [Disabled]
Phoenix-Award BIOS CMOS Setup Utility
Power
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When
this item is set to Enabled, the items Date (of Month) and Resume Time
(hh:mm:ss) become congurable with set values.
Conguration options: [Disabled] [Enabled]
Power Up By PS/2 Mouse [Disabled]
Allows you to disable or enable the Power Up by PS/2 Mouse function.
Conguration options: [Disabled] [Enabled]
Power Up By PS/2 Keyboard [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 keyboard
to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead. Conguration options: [Disabled]
[Enabled]