Specifications

3-14 Chapter 3: Starting up
3.4.3 ASUS MyLogo™
The ASUS MyLogo™ utility lets you customize the boot logo. The boot
logo is the image that appears on screen during the Power-On Self-Tests
(POST). The ASUS MyLogo™ is automatically installed when you install
the ASUS Update utility from the support CD. See section “3.3.2 Utilities
menu” for details.
• Before using the ASUS MyLogo™, use the AFUDOS BIOS Flash utility
to make a copy of your original BIOS le, or obtain the latest BIOS
version from the ASUS website. See section “5.1.3 AFUDOS utility.”
• Make sure that the BIOS item Full Screen Logo is set to [Enabled] if
you wish to use ASUS MyLogo2. See section “5.6.2 Boot Settings
Conguration”.
• You can create your own boot logo image in GIF, JPG, or BMP le
formats.
To launch the ASUS MyLogo™:
1. Launch the ASUS Update utility. Refer to section “3.4.3 ASUS Update
utility” for details.
2. Select Options from the drop down menu, then click Next.
3. Check the option Launch MyLogo to replace system boot logo before
ashing BIOS, then click Next.
4. Select Update BIOS from a le from the drop down menu, then click
Next.
5. When prompted, locate the new
BIOS le, then click Next. The
ASUS MyLogo window appears.
6. From the left window pane, select
the folder that contains the image
you intend to use as your boot
logo.