User's Manual

如果『登录者』在执行 WPS 之前，已经联机设定，则身份证明 ( Credentials )被更新成『登

录者』的设定；否则在注册成功后，『登录者』使用新的参数重新联机设定，然后 STA 『受理注

册机构』将会使用新的参数和 AP 做联机。如图

『WPS』-『PIN - xxx』详细设置如下：

一个成功的 PIN 联机设置：

Start PIN connection - SSID -> Begin associating to WPS AP -> Associated to WPS AP -> Sending

EAPOL-Start -> Sending EAP-Rsp (ID) -> Receive M1 -> Sending M2 -> Receive M3 -> Sending

M4 -> Receive M5 -> Sending M6 -> Receive M7 -> Sending M8 -> Receive EAP-Rsp (Done) ->

Sending EAP Rsp (ACK) -> Configured -> WPS status is disconnected -> WPS status is connected

successfully-SSID

『WPS』-『PBC - xxx』详细设置如下：

一个成功的 PBC 联机设置：

Start PBC connection -> Scanning AP -> Begin associating to WPS AP -> Associated to WPS

AP -> Sending EAPOL-Start -> Sending EAP-Rsp (ID) -> Receive M1 -> Sending M2 -> Receive

M3 -> Sending M4 -> Receive M5 -> Sending M6 -> Receive M7 -> Sending M8 -> Receive EAP

Rsp (Done) -> Sending EAP-Rsp (ACK)-> Configured -> WPS status is disconnected -> WPS status

is connected successfully-SSID

3.9 配置文件

【Profile】页面保存了您对各个无线网络的配置或者对同一网络的不同配置。