User's Manual

20 VivoMini UN Series
3. 2pin power connector (2-pin AUX_PWR)
This power connector is used to power custom solutions. The
standby power is always on, even when the board is powered
o, and the presence of1.8V, 3.3V, and 5V standby power can be
monitored with pins.
NOTE: Ensure to use the bundled cable when connecting a hard disk drive to
this connector.
4. SATA 6Gb/s connector & power connector (7-pin SATA6G_1;
5-pin SATA_PWR1)
This connector connects to Serial ATA 6 Gb/s hard disk drives via
the Serial ATA 6 Gb/s signal and power cable.