Owner's manual

vii
Care & Cleaning
• Follow the correct lifting techniques when positioning uFOTO.
Grasp the edges when lifting or carrying uFOTO.
• Turn your uFOTO off and unplug the power cord before cleaning.
Clean the surface with a lint-free, non-abrasive cloth. Stains may
be removed with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a
cleaner intended for use with the LCD. Never spray cleaner
directly on the screen, as it may drip inside device and cause an
electric shock.
The following indications are normal with uFOTO:
• The screen may flicker during the initial use due to the nature
of the fluorescent light. When this happens, turn off the power
switch then turn the device back on.
• You may find slightly uneven brightness on the screen
depending on the desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the
previous screen may remain after switching images. The screen
will recover slowly or you can also reset the device.
• If you encounter a problem with your device, contact your
retailer. Do not attempt to repair the device yourself.