User’s Manual

1-1
Product Introduction
1.1 Before you proceed
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
• Unplug the power cord from the wall socket before touching any component.
• Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.
• Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.
Unplug the power cord before installing or removing the motherboard. Failure to do so can
cause you physical injury and damage motherboard components.
1.2 Motherboard overview
Place this
side towards
the rear of the
chassis
DP
HDMI
VGA
M.2(WIFI)
DDR4 DIMM_A1 (64bit, 288-pin module) DDR4 DIMM_A2* (64bit, 288-pin module) DDR4 DIMM_B1 (64bit, 288-pin module) DDR4 DIMM_B2* (64bit, 288-pin module)
DIGI+
VRM
CPU_FAN
CHA_FAN2
RGB_HEADER1
ADD_GEN 2_1
ADD_GEN 2_2
COM_DEBUG
CHA_FAN1
TPM
F_PANEL
AAFP
SPDIF_OUT
SPEAKER
SATA6G_4
CLRTC
SATA6G_3 SATA6G_2 SATA6G_1
128Mb
BIOS
ATX_12V
ATX_PWR
U32G1_12
AMD
A520
BATTERY
USB_56
LAN_U32G1_34
KBMS
_U32G1_56
BIOS_FLBK
FLBK_LED1
AUDIO
Super
I/O
PCIEX1_1
PCIEX1_2
M.2(SOCKET3)
2280 2260 2242
PCIEX16
USB_3USB_12
COM
24.4cm(9.6in)
24.4cm(9.6in)
SOCKET AM4
Ethernet
Audio
Codec
RGB_HEADER2
8
5
15 1314 10 11 12
3
5 1 210 114 17 4
718169
6
19
1
ASUS TUF GAMING A520M-PLUS WIFI