User’s Manual

ASUS TUF B450-PRO GAMING
1-3
Beforeyouinstallorremoveanycomponent,ensurethattheATXpowersupplyis
switchedofforthepowercordisdetachedfromthepowersupply.Failuretodosomay
causeseveredamagetothemotherboard,peripherals,orcomponents.
• ActuallightingandcolorwillvarywithLEDstrip.
• IfyourLEDstripdoesnotlightup,checkiftheRGBLEDextensioncableandthe
RGBLEDstripisconnectedinthecorrectorientation,andthe12Vconnectoris
alignedwiththe12Vheaderonthemotherboard.
• TheLEDstripwillonlylightupwhenthesystemisoperating.
• TheLEDstripsarepurchasedseparately.
M.2_1/2 socket 3
ThesesocketsallowyoutoinstallM.2(NGFF)SSD
modules.
M.2_1(SOCKET3)
2280
22110
2260 2242
M.2_2(SOCKET3)
2280 2260 2242
• AMD Ryzen™ 2nd Generation/ Ryzen™ with
Radeon™ Vega Graphics/ Ryzen™ 1st Generation
Processors:
TheM.2_1socketsupportsPCIE3.0x4and
SATAmodeswithMKeydesignandtype
2242/2260/2280/22110storagedevicessupport
• AMD Athlon™ with Radeon™ Vega Graphics
Processors:
TheM.2_1socketsupportsSATAmodewithMKey
designandtype2242/2260/2280/22110storage
devicessupport.
• TheM.2_2socketsupportsPCIE2.0x4withMKey
designandtype2242/2260/2280storagedevices
support.
AMD Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1~6)
TheseconnectorsconnecttoSerialATA6.0Gb/sharddiskdrivesviaSerialATA
6.0Gb/ssignalcables.
System panel connector (20-5 pin F_PANEL)
Thisconnectorsupportsseveralchassis-mountedfunctions.
USB 3.1 Gen 1 (up to 5Gbps) connector (20-1 pin U31G1_12)
ConnectaUSB3.1Gen1moduletothisconnectorforadditionalUSB3.1
Gen1frontorrearpanelports.ThisconnectorcomplieswithUSB3.1Gen1
specicationsandprovidesfasterdatatransferspeedsofupto5Gbps,faster
chargingtimeforUSB-chargeabledevices,optimizedpowerefciency,and
backwardcompatibilitywithUSB2.0.
USB 2.0 connectors (10-1 pin USB34,USB56)
ConnectaUSBmodulecabletoanyoftheseconnectors,theninstallthemodule
toaslotopeningatthebackofthesystemchassis.TheseUSBconnectorscomply
withUSB2.0specicationsandsupportupto480Mbpsconnectionspeed.