User’s Manual

ASUS TUF B365-PLUS GAMING
1-3
CPU, chassis, and AIO pump fan
connectors (4-pin CPU_FAN, 4-pin
CHA_FAN1~2, 4-pin AIO_PUMP FAN)
Connect the fan cables to the fan
connectors on the motherboard,
ensuring that the black wire of each
cable matches the ground pin of the
connector.
AIO_PUMP PWM
AIO_PUMP IN
AIO_PUMP PWR
GND
CPU_FAN
CPU FAN PWM
CPU FAN IN
CPU FAN PWR
GND
CHA_FAN1
CHA FAN PWM
CHA FAN IN
CHA FAN PWR
GND
CHA_FAN2
GND
CHA FAN PWR
CHA FAN IN
CHA FAN PWM
AIO_PUMP FAN
Do not forget to connect the fan cables to the fan connectors. Insufcient air ow inside
the system may damage the motherboard components. These are not jumpers! Do not
place jumper caps on the fan connectors! The CPU_FAN connector supports a CPU fan
of maximum 1A (12 W) fan power.
Intel
®
LGA1151 CPU socket
Install Intel
®
LGA1151 CPU into this surface mount LGA1151 socket, which is
designed for 9th / 8th Gen Intel
®
Core™, Pentium
®
Gold and Celeron
®
processors.
For more details, refer to 1.3 Central Processing Unit (CPU).
DDR4 DIMM slots
Install 2 GB, 4 GB, 8 GB, and 16 GB unbuffered non-ECC DDR4 DIMMs into these
DIMM sockets.
For more details, refer to 1.4 System memory.
AURA RGB header (RGB_HEADER1~2)
These connectors are for RGB LED strips.
Addressable RGB header (4-pin ADD_HEADER)
This connector is for individually addressable RGB
WS2812B LED strips or WS2812B based LED strips
The addressable RGB header supports WS2812B addressable RGB LED strips (5V/
Data/Ground), with a maximum power rating of 3A (5V) and a maximum of 120 LEDs.
5
G