User’s Manual

1-4
Chapter 1: Product Introduction
M.2 sockets (M.2_1; M.2_2)
ThesesocketsallowyoutoinstallM.2(NGFF)SSD
modules.
M.2(SOCKET3)
• TheM.2_1socketsupportsMKeyand2242/2260/2280storagedevices
(bothSATA&PCIEx2mode),andsupportsdatatransferspeedofupto16Gb/s.
• TheM.2_2socketsupportsMKeyand2242/2260/2280/22110storagedevices
(PCIEx2mode),andsupportsdatatransferspeedofupto16Gb/s.
• WhenadeviceinSATAmodeisinstalledontheM.2_1socket,SATA_2port
cannot be used.
Intel
®
B360 Serial ATA 6.0Gb/s connectors (7-pin
SATA6G_1-6)
TheseconnectorsconnecttoSerialATA6.0Gb/shard
diskdrivesviaSerialATA6.0Gb/ssignalcables.
GND
RSATA_TXP
RSATA_TXN
GND
RSATA_RXN
RSATA_RXP
GND
SATA6G
System panel connector (20-3 pin PANEL)
Thisconnectorsupportsseveralchassis-mounted
functions.
• System power LED (4-pin PWR_LED)
 This4-pinconnectorisforthesystempower
LED.ConnectthechassispowerLED
cable to this connector. The system power
LEDlightsupwhenyouturnonthesystem
power,andblinkswhenthesystemisin
sleep mode.
• SystempowerLED(2-pinor3-1pinPLED)
 The2-pinor3-1pinconnectorisforthesystempowerLED.
• HarddiskdriveactivityLED(2-pinHDD_LED)
 This2-pinconnectorisfortheHDDActivityLED.
• Systemwarningspeaker(4-pinSPEAKER)
 This4-pinconnectorisforthechassis-mountedsystemwarningspeaker.
• ATXpowerbutton/soft-offbutton(2-pinPWR_SW)
This connector is for the system power button.