User Manual

5-14
Chapter 5: BIOS Setup
5.6.7 APM
Allows you to configure the Advance Power Management (APM) settings.
Restore AC Power Loss
When set to [Power Off], the system goes into off state after an AC power loss. When set
to [Power On], the system will reboot after an AC power loss. When set to [Last State], the
system goes into either off or on state, whatever the system state was before the AC power
loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By PCIE
[Disabled] Disables the PCIE devices to generate a wake event.
[Enabled] Enables the PCIE devices to generate a wake event.
Power On By RTC
[Disabled] Disables RTC to generate a wake event.
[Enabled] When set to [Enabled], the items RTC Alarm Date (Days) and
Hour/Minute/Second will become user-configurable with set values.
5.6.8 PCI Subsystem Settings
Allows you to configure PCI, PCI-X, and PCI Express Settings.
Load RT32 Image
Allows you to enable or disable RT32 Image Loading.
Configuration options: [Disabled] [Enabled]
Above 4G Decoding
Allows you to enable or disable 64-bit capable devices to be decoded in above 4G address
space. It only works if the system supports 64-bit PCI decoding.
Configuration options: [Disabled] [Enabled]
SR-IOV Support
This option enables or disables SIngle Root IO Virtualization Support if the system has
SRIOV capable PCIe devices.
Configuration options: [Disabled] [Enabled]
PCIE OPROM Slot Options
PCIE1-7 Slot OPROM
This option allows you to enable or disable the OPROM of the PCIe slots.
Configuration options: [Disabled] [Enabled]
5.6.9 Network Stack Configuration
The items in this menu allow you to configure Ipv4 / Ipv6 PXE support.