User Guide

2-15
ASUS TS300-E9-PS4
2.5.3 Removing the backplane
DONOTremovethebackplaneunlessnecessary!
1. Remove all hot-swap HDD trays from
the chassis.
2. DisconnectallcablesfromtheSATA/
SASbackplane.
3. Loosen the four screws on the
backplane.
4. Firmlyholdthebackplane,andturnitin
the direction of the arrow.
5. Removethebackplanefromthe
module.
2.5.4 Installing a hot-swap SATA/SAS hard disk drive
1. Releaseadrivetraybypushingthe
springlocktotheright,andthenpulling
the tray lever outward. The drive tray
ejects slightly after you pull out the lever.