User Guide

Chapter 2: Hardware setupChapter 2: Hardware setup

Chapter 2: Hardware setup

2-282-28

2-28

Back sideBack side

Back side

The back side of SCSI backplane faces the

rear panel when installed. This side

includes the power connectors, SCSI

interfaces for the motherboard SCSI

connector or the SCSI/RAID card and

terminator, an HDD fan connector, and

SMBus connectors.

• the upper SCSI interface of the backplane connects to the motherboard

SCSI connector or the SCSI/RAID card

• a SCSI multi-mode terminator (LVD/SE) is connected to the lower SCSI

interface of the backplane

68-pin SCSI connector68-pin SCSI connector

68-pin SCSI connector

(connects the SCSI cable from (connects the SCSI cable from

(connects the SCSI cable from

thethe

the

motherboard SCSI connector ormotherboard SCSI connector or

motherboard SCSI connector or

the SCSI/RAID card)the SCSI/RAID card)

the SCSI/RAID card)

SMBus connectorSMBus connector

SMBus connector

[SMB_IN1] (connects the SMB cable[SMB_IN1] (connects the SMB cable

[SMB_IN1] (connects the SMB cable

from the motherboard)from the motherboard)

from the motherboard)

Fan connector Fan connector

Fan connector

(for HDD fan)(for HDD fan)

(for HDD fan)

Power connectorsPower connectors

Power connectors

(connect power(connect power

(connect power

plugs from the power supply)plugs from the power supply)

plugs from the power supply)

68-pin SCSI connector68-pin SCSI connector

68-pin SCSI connector

(with SCSI multi-mode terminator)(with SCSI multi-mode terminator)

(with SCSI multi-mode terminator)