User Guide

Chapter 2: Hardware Information
2-16
Installing 2.5-inch HDD/SSD
Toinstalla2.5-inchHDD/SSD:
1. Remove the side cover of the chassis. Refer to the
Removing the side cover
section
for more information.
2. Preparethe2.5-inchHDD/SDDandthebundledsetofscrews.
3. Laythesystemonitssideonaatandstablesurface.
4. LocatetheHDDcagelock,pressitup(A),thenswingtheHDDcageoutwards(B).
5. Alignandinsertthe2.5-inchHDD/SSDintothedrivebayasshown.Pushitalltheway
untilitsscrewholesalignwiththeholesonthedrivebay.
HDD cage lock
HDD cage
matching screw holes
2.5-inch HDD/SSD