User Guide

Chapter 2: Hardware Information
2-12
2.5 5.25-inch drives
Installing a 5.25-inch drive
Toinstalla5.25-inchdrive:
1. Remove the front panel cover. Refer to
the
Removing the front panel cover
section for more information.
2. Pullthebaylocksoutward.
3. Removethemetalcoverofthebay
you intend to use.
Takeextracarewhenremovingthe
metal cover. Use tools such as a
screwdrivertobendandremove
the metal cover to avoid physical
injury.
Thissystemcomeswiththree5.25-inchdrive
bayslocatedontheupperfrontsectionofthe
chassis.
Ifyoursystemcamewithanoptical
drive, the optical drive occupies the
topmostbay(1).Thelowerbays(2
and3)areavailableforadditional
5.25-inchoptical,zip,oroppydisk
drives.
bay locks
screw driver
metal cover