User's Manual

華碩 TS100-E7/PI4 用戶手冊
4-21
Change Settings [Auto]
提供您選擇串口的基礎地址。設置值有：[Auto] [IO=3F8h; IRQ=4]
[IO=3F8h: IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12]
[IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12]
[IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12]
[IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12]
Parallel Port Configuration
本菜單中的這個子項目為提供您設置并口。
Parallel Port [Enabled]
提供您啟用或關閉并口（LPT/LPTE）。設置值有：[Enabled] [Disabled]
Change Settings [Auto]
提供您選擇 Super IO 設備的最理想設置。
設置值有：[Auto] [IO=378h; IRQ=5]
[IO=378h: IRQ=5, 6, 7, 9, 10, 11, 12]
[IO=278h; IRQ=5, 6, 7, 9, 10, 11, 12]
[IO=3BCh; IRQ=5, 6, 7, 9, 10, 11, 12]
Device Mode [STD Printer Mode]
本項目為提供您選擇打印端口模式。設置值有：[STD Printer mode]
[SPP Mode] [EPP-1.9 and SPP Mode] [EPP-1.7 and SPP Mode] [ECP
Mode] [ECP and EPP 1.9 Mode] [ECP and EPP 1.7 Mode]