User's Manual

華碩 TS100-E7/PI4 用戶手冊
4-11
4.4 事件記錄菜單（Event Log Menu）
本菜單提供您更改事件記錄設置與查看系統事件記錄。
Smbios Event Log [Enabled]
提供您啟用或關閉所有 Smbios event logging（事件載入）功能。設置值
有：[Disabled] [Enabled]
Erase Event log [No]
提供您選擇清除 Smbios event log 裡的項目。設置值有：[No] [Yes,
Next reset] [Yes, Every reset]
When Log is Full [Do Nothing]
當事件記錄（event log）滿了時，本項提供您設置做如何反應。設置值
有：[Do Nothing] [Erase Immediately]
MECI [xx]
提供您調整 MECI（Multiple Event Count Increment），此為設置 same
error 重複出現的次數。使用 <+> 與 <-> 鍵調整數值，數值的範圍為 1
至 255。
METW [xx]
提供您調整 METW (Multiple Event Time Window) 數值，此為設置
same error 重複出現的最小時間差距。使用 <+> 與 <-> 鍵輸入調整數
值，數值的範圍為 0 至 99。
Change Smbios Event Log Settings
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main Event Logs Advanced Monitor Boot Tool Exit
Press <Enter> to change the
Smbios Event Log conguration.
Change Smbios Event Log Settings
View Smbios Event Log
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main Event Logs Advanced Monitor Boot Tool Exit
Change this to enable or
disable all features of Smbios
Event Logging during boot.
Enabling/Disabling Options
Smbios Event Log [Enabled]
Erasing Settings
Erase Event Log [No]
When Log is Full [Do Nothing]
Smbios Event Log Standard Settings
MECI 1
METW 60
Custom Options
Log OEM Codes [Enabled]
Convert OEM Codes [Disabled]
NOTE: All values changed here do not take effect
until computer is restarted.