User's Manual

華碩 TS100-E5/PI4 用戶手冊
6-5
6.1.2 安裝 RAID 驅動程序
Windows Server 操作系統
當 Windwos Server 系統安裝時
當 Windows Server 系統安裝時，請安裝 RAID 驅動程序：
1. 使用 Windows Server 系統安裝光盤啟動，然後就會進入 Windows
Setup 安裝畫面。
2. 當出現“Press F6 if you need to install a third party SCSI or RAID
driver...”的信息時，請點擊 <F6> 鍵。
3. 當出現對話框時，請點擊 <S> 鍵來指定一個額外的設備（Specify
Additional Device）。
S=SpecifyAdditionalDeviceENTER=ContinueF3=Exit
Windows Setup
Setup could not determine the type of one or more mass storage devices
installed in your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage devices(s):
<none>
* To specify additional SCSI adapters, CD-ROM drives, or special
diskcontrollersforusewithWindows,includingthosefor
whichyouhaveadevicesupportdiskfromamassstoragedevice
manufacturer, press S.
*Ifyoudonothaveanydevicesupportdisksfromamassstorage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.
ENTER=ContinueESC=CancelF3=Exit
Windows Setup
Pleaseinsertthedisklabeled
Manufacturer-suppliedhardwaresupportdisk
into Drive A:
* Press ENTER when ready.
4. 放入先前製作好的 RAID 驅動程序軟盤於軟驅中，然後按 <Enter> 鍵。