User's Manual

華碩 TS100-E5/PI4 使用手冊
6-5
6.1.2 安裝 RAID 驅動程式
Windows Server 作業系統
當 Windwos Server 系統安裝時
當 Windows Server 系統安裝時，請安裝 RAID 驅動程式：
1. 使用 Windows Server 系統安裝光碟開機，然後就會進入 Windows Setup
安裝畫面。
2. 當出現“Press F6 if you need to install a third party SCSI or RAID driver...”
的訊息時，請按下 <F6> 鍵。
3. 當出現對話框時，請按下 <S> 鍵來指定一個額外的裝置（Specify
Additional Device）。
S=SpecifyAdditionalDeviceENTER=ContinueF3=Exit
Windows Setup
Setup could not determine the type of one or more mass storage devices
installed in your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage devices(s):
<none>
* To specify additional SCSI adapters, CD-ROM drives, or special
diskcontrollersforusewithWindows,includingthosefor
whichyouhaveadevicesupportdiskfromamassstoragedevice
manufacturer, press S.
*Ifyoudonothaveanydevicesupportdisksfromamassstorage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.
ENTER=ContinueESC=CancelF3=Exit
Windows Setup
Pleaseinsertthedisklabeled
Manufacturer-suppliedhardwaresupportdisk
into Drive A:
* Press ENTER when ready.
4. 放入先前製作好的 RAID 驅動程式磁碟片於軟碟機中，然後按 <Enter> 鍵。