User's Manual

華碩 TS100-E5/PI4 使用手冊
5-27
10. 當完成所選擇的邏輯磁碟裝置的設定時，請選擇畫面中的 Accept，然後
按下 <Enter> 鍵。
11. 請依照步驟 5～10 來設定相關的硬碟裝置。
12. 當完成並儲存設定後，按下 <Esc> 鍵回到主畫面（Management Menu）。
當您完成 RIAD 設定之後，您必須進行邏輯磁碟初始化（Initialize）的動
作，請參考 5.4.4 節的介紹。
LSILogicSoftwareRAIDCongurationUtilityVerA.51Aug13,2007
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Management Menu
Congure
Initialize
Objects
Rebuild
CheckConsistency
PORT #
DNLIN A00-00
DNLIN A00-01
0
1
EasyConguration-ARRAYSELECTIONMENU
LogicalDrive(s)Congured
LDRAIDSize#StripesStripSzStatus
0 1 77247MB 2 64 KB ONLINE
Logical Drive 0
RAID = 1
Size=77247MB
DWC = Off
RA = On
Accept
SPAN = NO
AcceptThisVDCongurationAndGoToNextVD
LSILogicSoftwareRAIDCongurationUtilityVerA.51Aug13,2007
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Management Menu
Congure
Initialize
Objects
Rebuild
CheckConsistency
Select Yes Or No
CongurationMenu
EasyConguration
NewConguration
View/AddConguration
ClearConguration
Select Boot Drive
LogicalDrive(s)Congured
LDRAIDSize#StripesStripSzStatus
0 1 77247MB 2 64 KB ONLINE
SaveConguration?
Yes
No