User Guide

2-13ASUS TS100-E5/PI4
6. Attach the other side of the HDD
screw holes to the cage pin caps,
as shown in the right gure.
7. Carefully insert the HDD holder
and push it all the way to the depth
of the bay until the cage handles x
to the HDD bay.
8. From the other side of the chassis,
connect one end of the 7-pin SATA
cable to the SATA connector at
the end of the drive. Connect the
other end of the cable to a SATA
connector on the motherboard.
9. Connect a 15-pin SATA power plug
to the SATA power connector at the
back of the drive.
Use either the 15-pin SATA power connector OR the legacy 4-pin power
connector. DO NOT use both to prevent damage to components and to keep
the system from becoming unstable.