User Guide

3-73-7
3-73-7
3-7
ASUS TS100-E3ASUS TS100-E3
ASUS TS100-E3ASUS TS100-E3
ASUS TS100-E3
6.6.
6.6.
6.
Gigabit LAN controller setting (3-pin LAN_EN1)Gigabit LAN controller setting (3-pin LAN_EN1)
Gigabit LAN controller setting (3-pin LAN_EN1)Gigabit LAN controller setting (3-pin LAN_EN1)
Gigabit LAN controller setting (3-pin LAN_EN1)
These jumpers allow you to enable or disable the onboard Broadcom
®
BCM5753 Gigabit LAN1 or LAN2 controller. Set to pins 1-2 to activate
the Gigabit LAN controller.
7.7.
7.7.
7.
RAID controller selection (3-pin RAID_SEL1)RAID controller selection (3-pin RAID_SEL1)
RAID controller selection (3-pin RAID_SEL1)RAID controller selection (3-pin RAID_SEL1)
RAID controller selection (3-pin RAID_SEL1)
This jumper allows you to select the RAID configuration utility to use when
you create disk arrays. Place the jumper caps over pins 1-2 if you want to use
the LSI Logic Embedded SATA RAID Setup Utility (default); or, place the
jumper caps to pins 2-3 for the Intel
®
Matrix Storage Manager.
P5MT-MX/C LAN_EN1 Setting
Enable
(Default)
Disable
LAN_EN1
2
1
2
3


®
P5MT-MX/C
RAID_SEL1
LSI RAID ROM
(Default)
INTEL RAID ROM
2
1
2
3
P5MT-MX/C RAID_SEL1 Setting


®
P5MT-MX/C