User Guide

Chapter 3: Motherboard informationChapter 3: Motherboard information

Chapter 3: Motherboard information

3-63-6

3-6

4.4.

Keyboard power (3-pin KBPWR1)Keyboard power (3-pin KBPWR1)

Keyboard power (3-pin KBPWR1)

This jumper allows you to enable or disable the keyboard wake-up feature.

Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you

press a key on the keyboard (the default is the Space Bar). This feature

requires an ATX power supply that can supply at least 1A on the +5VSB

lead, and a corresponding setting in the BIOS.

5.5.

VGA controller setting (3-pin VGA_EN1)VGA controller setting (3-pin VGA_EN1)

VGA controller setting (3-pin VGA_EN1)

These jumpers allow you to enable or disable the onboard ATI

RAGE-XL

PCI VGA controller. Jumpers setting to pins 1-2 will activate the VGA

feature.



®

P5MT-MX/C

P5MT-MX/C Keyboard Power Setting

KBPWR1

(Default)

+5V +5VSB

P5MT-MX/C VGA Setting

VGA_EN1

Enable

(Default)

Disable



®

P5MT-MX/C