User Guide

2-192-19
2-192-19
2-19
ASUS TS100-E3ASUS TS100-E3
ASUS TS100-E3ASUS TS100-E3
ASUS TS100-E3
5. Connect the IDE cable to the IDE
connector on the back of the
drive.
6. Connect a 4-pin plug from the
power supply to the power
connector on the back of the
drive.
IDE cableIDE cable
IDE cableIDE cable
IDE cable
Power plugPower plug
Power plugPower plug
Power plug
3. Make sure that the drive and bay
hole align as shown. When in
place, the drive protrudes about
an inch from the front panel.
4. Secure the drive with a screw.