User Guide

Chapter 2: Hardware setupChapter 2: Hardware setup

Chapter 2: Hardware setup

2-182-18

2-18

2.7 5.25-inch drives

Two 5.25-inch drive bays are located

on the upper front part of the chassis.

A CD-ROM drive that comes standard

with the system package occupies the

uppermost bay

(labeled 1)

. The other

bay

(labeled 2)

is available for

additional 5.25-inch device.

To install a 5.25-inch drive:

1. Use a Phillips (cross) screwdriver

or one finger to remove the metal

cover of the bay where you want

to install the drive.

2. Insert the optical drive into the

5.25-inch drive bay.

If you have powered up the system, make sure to unplug the AC power

cable before installing or removing any system components. Failure to do

so may cause damage to the motherboard and other system components!