User Guide

Appendix: Reference informationAppendix: Reference information
Appendix: Reference informationAppendix: Reference information
Appendix: Reference information
A-4A-4
A-4A-4
A-4
A.2 Simple fixes
The pThe p
The pThe p
The p
ower LED on theower LED on the
ower LED on theower LED on the
ower LED on the
server or on the monitor doserver or on the monitor do
server or on the monitor doserver or on the monitor do
server or on the monitor do
not light upnot light up
not light upnot light up
not light up
1. Check if the power cable is
properly connected to the
power connector in the system
rear panel.
2. Make sure that the power
cables are connected to a
grounded power outlet.
3. Press the power button to
make sure that the system is
turned on.
The kThe k
The kThe k
The k
eyboard does noteyboard does not
eyboard does noteyboard does not
eyboard does not
workwork
workwork
work
Check if the keyboard cable is
properly connected to the PS/2
keyboard port.
The mouse does not workThe mouse does not work
The mouse does not workThe mouse does not work
The mouse does not work Check if the mouse cable is properly
connected to the mouse port.
The system does notThe system does not
The system does notThe system does not
The system does not
perform power-on self testsperform power-on self tests
perform power-on self testsperform power-on self tests
perform power-on self tests
(POST) after it was turned(POST) after it was turned
(POST) after it was turned(POST) after it was turned
(POST) after it was turned
onon
onon
on
1. Check the memory modules
and make sure you installed the
DIMMs the system supports.
2. Make sure that the DIMMs are
properly installed on the
sockets.
ProblemProblem
ProblemProblem
Problem
ActionAction
ActionAction
Action
Some problems that you may encounter are not due to defects on the
system or the components. These problems only requires simple
troubleshooting actions that you can perform by yourself.
The systemThe system
The systemThe system
The system
continuously continuously
continuously continuously
continuously
beeps after it was turnedbeeps after it was turned
beeps after it was turnedbeeps after it was turned
beeps after it was turned
onon
onon
on
1. Check the memory modules
and make sure you installed
supported DIMMs.
2. Make sure that the DIMMs are
properly installed on the
sockets.
The message “Non-systemThe message “Non-system
The message “Non-systemThe message “Non-system
The message “Non-system
disk or disk edisk or disk e
disk or disk edisk or disk e
disk or disk e
rror” appearsrror” appears
rror” appearsrror” appears
rror” appears
1. Check if a bootable HDD is
active.
2. Check if the HDDs are properly
installed.
Network connection notNetwork connection not
Network connection notNetwork connection not
Network connection not
availableavailable
availableavailable
available
1. Make sure that the network
cable is connected to the
LAN port on the rear panel.
2. Make sure that you have
installed the LAN drivers
from the support CD.