User's Manual

1. Check Image Version

Please follow the path below to check the image version before and after image

update:

Enter [Settings] [About phone] Find the [Build number] to check the image

version.

2. Requirement

 A windows PC

 A USB cable

 The battery life of device has to be more that 15%

3. Updating Image Through Detecting Notification

Download the zipped image files (about 3 or 4 zipped files) to your Step 1:

Windows PC.

Double click the first zipped file with “exe.” in the end of the file name. Step 2:

Then, it will start to extract all of 3 or 4 zipped files.

After extracting, go into the extracted folder, you will get a zip file with Step 3:

prefix “UL-K00G” (ex: “UL-K00G-WW-10.16.1.3.1-userdebug.zip”).

Connect the device with your PC. Step 4:

Place the zip file with prefix “UL-K00G” to the root directory of the Step 5:

PAGE 1
. Check Image Version Please follow the path below to check the image version before and after image update: Enter [Settings] [About phone] Find the [Build number] to check the image version. 2. Requirement  A windows PC  A USB cable  The battery life of device has to be more that 15% 3. Updating Image Through Detecting Notification Step 1: Download the zipped image files (about 3 or 4 zipped files) to your Windows PC. Step 2: Double click the first zipped file with “exe.
PAGE 2
internal sdcard storage. Step 6: Disconnect the device from your PC. Step 7: Then, a detecting notification (an exclamation mark) will show up on the top left corner of the screen. Step 8: Pull down the notification list and select “System Update File Detected”. Step 9: Select the image package which is going to update in the “Select Update Package” window -> press “OK” to go through the update process.
PAGE 3
Step 10: After the system update is confirmed in the “System Update Available” window, the device will automatically reboot and go into the recovery mode to update the image.
PAGE 4
Step 11: When the updating is completed, device will automatically reboot and show “Android is upgrading…” message (It will take about 5 minutes to enter Android system after image upgrading). Step 12: Check the “build number” in “Settings” to see if the image has been correctly updated.