E15969 First Edition September 2019 TINKER S/BR Innovatively enjoy a whole new digital experience Copyright © ASUSTeK Computer Inc.
Thank you for purchasing ASUS TINKER S/BR! TINKER S/BR is more than a dream for the DIY-obsessed: it’s a gateway to new ideas and new relationships. Experienced makers will love TINKER S/BR’s performance-to-price ratio and strong brand heritage, while novices and younger users will appreciate its accessibility and ease of use.
ASUS TINKER S/BR specifications summary Rockchip RK3288 Cortex-A17 Quad-core SoC* Processor GPU * The CPU will operate at full capacity, take note of heat dissipation and AC adaptor stability. ARM® Mali™-T760 MP4 GPU 1 x HDMI* supports up to 4K Display 1 x 15-pin MIPI DSI supports up to HD * HDMI supports a maximum resolution of up to 4K, and the iGPU only supports H.264/H.265 4K hardware decoders.
Getting Started Booting from onboard eMMC Requirement: • • • 1 x Micro USB cable with data transfer function 1 x Tinker Power Supply* or other qualified 5V/3A power supply** 1 x Monitor with HDMI cable • 1 x Keyboard and Mouse set * The Tinker Power Supply is purchased seperately. ** Ensure that the cable is able to deliver up to 3A of power current. Connect the TINKER S/BR to a PC using a Micro USB cable, then wait for the PC to recognize the device.
Top view default disable Power on eMMC Recovery
Bottom view 16GB
Notices Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Radio Frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile exposure conditions. (antennas are greater than 20cm from a person’s body).
VCCI: Japan Compliance Statement Contains module 204-430024 Class B ITE Items Bluetooth WLAN Maximum Radio-Frequency Output Table Bluetooth RF (2400~2483.5 MHz) 1.75 (dBm) Bluetooth 4.0-LE (2400~2483.5 MHz) 1.94 (dBm) 2.4GHz 802.11b (2400~2483.5 MHz) 12.95 (dBm) 2.4GHz 802.11g (2400~2483.5 MHz) 12.89 (dBm) 2.4GHz 802.11n HT20 (2400~2483.5 MHz) 12.78 (dBm) 2.4GHz 802.11n HT40 (2400~2483.5 MHz) 10.
Vereinfachte EU-Konformitätserklärung ASUSTek COMPUTER INC erklärt hiermit, dass dieses Gerät mit den grundlegenden Anforderungen und anderen relevanten Bestimmungen der Richtlinie 2014/53/EU übereinstimmt. Der gesamte Text der EUKonformitätserklärung ist verfügbar unter: https://www.asus.com/support/ Dichiarazione di conformità UE semplificata ASUSTek Computer Inc.
Egyszerűsített EU megfelelőségi nyilatkozat Pojednostavljena Deklaracija o usaglašenosti EU Az ASUSTek Computer Inc. ezennel kijelenti, hogy ez az eszköz megfelel az 2014/53/EU sz. irányelv alapvető követelményeinek és egyéb vonatkozó rendelkezéseinek. Az EU megfelelőségi nyilatkozat teljes szövegét a következő weboldalon tekintheti meg: https://www.asus.com/support/ ASUSTek Computer Inc.
