User Guide

21
NOTE: Todisablethelockfunctionfrom
Local KB lock
or
-
RC lock
item,pressbuttons[ ] and 1 9 9 8onthe
remotecontrol.
Pixel shift
Forvideoinputsources,youmaychoose{On}tomovethescreen
imageautomaticallytoprotectthedisplayfrom“burn-in”or“after-image”
symptoms30secondsafternotoperatingthedisplay.
Smart power
Chooseabacklightleveltooptimisedynamicpowerconsumptionand
picturecontrast.
Theoptionsare:{Off},{Standard},{Best Power},{Best Picture}.
Wake on lan
Choose{On}andyoucanturnonthedisplaybynetwork.
Switch on state
Choosethedisplaystatususedforthenexttimeyouconnectthe
powercord.
• {On}-Thedisplaywillturnonwhenthepowercordisconnected
toawalloutlet.
• {Standby}-ThedisplaywillremainStandbywhenthepowercordis
connectedtoawalloutlet.
• {Last status}-Thedisplaywillreturntothepreviouspowerstatus
(on/off/standby)whenremovingandreplacingthepowercord.
LED
Choose{Off}toturnofftheindicator.
Switch on delay
Adjustthepower-ondelayingtime(inseconds)allowsasequential
powering-onforeachdisplaybytheirIDnumberwhenmultipledisplays
areconnected.
APM
Choose{On}.Then,whennosignal,thedisplaywillautomaticallyturn
off.
LOGO
Choose{off}toclosethelogowhenthedisplayturnon
Information OSD
Whenyoupress[ ] POWERbuttontoturnonthedisplayfrom
standbymodeorchangetheinputsignal,theinformationOSDis
displayedontheupperleftcornerofthescreen.
Choose{Off}toturnoffthisfunction.
DisplayPort Ver.:
SettheDisplayPortversionto1.1aor1.2,thissettingisonlyvalidon
DisplayPortinputandoutput,
1.1a:SwitchDisplayPortVer.to1.1a(default),theDisplayPortoutputis
thecloneoftheDisplayPortinput.
1.2:SwitchDisplayPortVer.to1.2tosupportMST(Multi-Stream
Transport)
NOTE: IfthedisplayisblackscreenorabnormalunderDisplayPort
source,pleaseswitchto1.1aandturnACoffandon.
Cooling Fan
Select{On}toturnonthecoolingfanallthetime.Select{Auto}toturn
on/offthecoolingfanaccordingtothedisplay’stemperature.
NOTES:
• Thedefault{Auto}optionwillstartrunningthecoolingfanifthe
temperatureof60°C(140°F)isreached.
• Atemperature-warningmessagewillbeshownonthescreenifthe
temperaturereaches70°C(158°F).
• Afterthetemperaturereaches70°C(158°F),forthreesuccessive
mininutesandatemperature-waningmessageshownonthescreen
for10seconds,thedisplaypowerwillbeshutdownautomatically
whilePowerLEDwillbeblinkingred&green.
Network control port
ChoosetheRS232controlformCardOPSorembeddedRS232inPD
set.
Factory settings
Resetallyourcustomizedsettingstothefactorydefaults.
5.2. Network Settings
1. Press[ ] HOMEbutton,choose
Network Settings
andpress
[ ]button.
View network settings
Network configuration
Static IP configuration
Digital Media Render...
Network name
Picture
Sound
Tiling
General settings
Network settings
View network settings
Viewconnectednetworkstatus.
Network Conguration
{Network conguration}:Choosehowthisdisplayshouldassign
addressestothenetworkresources.
Theusercanchoose{DHCP & Auto IP}(suggested)or{Static IP}.
Static IP Conguration
Dene{IP address},{Netmask},{Gateway},{DNS1},and{DNS2}for
thisdisplay.If{Network settings}

{Static IP}ischosen.
Digital Media Renderer - DMR
Receivemultimedialesfromtheconnecteddevicebyyournetwork.
Network name
Inthemultiple-displayconnection,youcanrenameeachdisplayforeasy
identication.
Usetheon-screenkeyboardortheremotecontrolkeypadtoenterthe
name.