User Guide

EnglishEnglish
EnglishEnglish
English
77
77
7
Installation guideInstallation guide
Installation guideInstallation guide
Installation guide
4.24.2
4.24.2
4.2
Installing on IntelInstalling on Intel
Installing on IntelInstalling on Intel
Installing on Intel
®®
®®
®
Pentium Pentium
Pentium Pentium
Pentium™
4 processor in 4 processor in
4 processor in 4 processor in
4 processor in
the LGA775 and 478-pin packagethe LGA775 and 478-pin package
the LGA775 and 478-pin packagethe LGA775 and 478-pin package
the LGA775 and 478-pin package
4.2.14.2.1
4.2.14.2.1
4.2.1
Placing the stand-offsPlacing the stand-offs
Placing the stand-offsPlacing the stand-offs
Placing the stand-offs
1. Locate the CPU socket screw holes.
2. Position the metal underplate and rubber
gasket underneath the motherboard, then
insert four screws (#2) to the underplate
screw holes matching that of the CPU socket
screw holes.
NOTE.NOTE.
NOTE.NOTE.
NOTE. Make sure that the insulated side of
the metal underplate faces the rubber gasket.
3. When the screws protrude on the top side of
the motherboard, drive in four copper stand-offs
(#5) to the screws, then tighten in a diagonal
sequence(two opposite corners at a time).
4. Apply the thermal grease evenly on top of the
installed CPU.
MetalMetal
MetalMetal
Metal
underplateunderplate
underplateunderplate
underplate
RubberRubber
RubberRubber
Rubber
gasketgasket
gasketgasket
gasket
CPUCPU
CPUCPU
CPU
Stand-offStand-off
Stand-offStand-off
Stand-off
#2#2
#2#2
#2