User Guide

ASUS ASMM User’s Manual14
I. ASUS ASMM
Jumper and Connector Settings
Jumpers
JP1: LM78 I/O space select (Option; PROVIDED BY NEGOTIATION)
1-2 0x0290–0x0297 (default)
3-4 0x02B0–0x02B7
5-6 0x02D0–0x02D7
7-8 0x02F0–0x02F7
JP2: ASR I/O space select (Option; PROVIDED BY NEGOTIATION)
1-2 0x0398–0x039F
3-4 0x03B8–0x03BF
5-6 0x03D8–0x03DF
7-8 0x03F8–0x03FF
JP3: FAN 3 double pulse selection (Option; PROVIDED BY NEGOTIATION)
1-2 FAN 3 gets normal FAN pulse signal (default SHORT)
2-3 FAN 3 gets double FAN pulse signal
JP4/JP5: ASR period selection
JP4 JP5 Period select
2-3 2-3 5.5 min
1-2 2-3 4 in
2-3 1-2 1.5 min
1-2 1-2 30 sec
JP6: LM78 IRQ selection
JP6 IRQ select JP6 IRQ select
1-2 IRQ3 7-8 IRQ6
3-4 IRQ4 9-10 IRQ7
5-6 IRQ5
NOTE: Only one jumper can be set or IRQ lines will get conflict.
JP7: Chassis intrusion selection
JP7 Period select
2-3 Disable the Chassis intrusion detection on ASMM
1-2 Enable the Chassis intrusion detection on ASMM
I. ASUS ASMM
Jumpers