User Guide

SL200 User Manual
Chapter 2 PC Conguration
5
2 PC Configuration
User needs to congure TCP/IP network settings, Internet access
conguration for each system within SL200 LAN. The SL200
Router, by default, acts as a DHCP server, it automatically assigns
IP address to each system when the systems boot up. If users
choose fixed IP addresses for client systems, the gateway of the
client system must be set to the IP address of the Router and DNS
of the client system should be set to the address provided by your
ISP.
2.1 TCP/IP Networking Setup
2.1.1 Checking TCP/IP Settings for Windows 9x/ME
a ) Select “
Start -> Control Panel -> Network
”, the following
window will appear: