Specifications

IPIBL-SI 17
7. Front panel audio connector (10-1-pin F_AUDIO)
Thisconnectorisforachassis-mountedfrontpanelheadphoneport.
6. CPU and System fan connectors (4-pin CPU_FAN, 3-pin REAR_FAN,
3-pin FRONT_FAN)
Thesefanconnectorssupportcoolingfansof350mA�740mA(8.88Wmax.)
oratotalof1A�2.22A(26.64Wmax.)at+12V.Connectthefancablesto
thefanconnectorsonthemotherboard,makingsurethattheblackwireof
eachcablematchesthegroundpinoftheconnector.
Donotforgettoconnectthefancablestothefanconnectors.Insufcientair
owinsidethesystemmaydamagethemotherboardcomponents.Theseare
notjumpers!DOnotplacejumpercapsonthefanconnectors.
IPIBL-SI Fan connectors
R
IPIBL-SI
CPU_FAN
FRONT_FAN
GND
Rotation
+12V
REAR_FAN
GND
Rotation
+12V
PWN
GND
Rotation
+12V
IPIBL-SI Front panel audio connector
R
IPIBL-SI
F_AUDIO
Line out_L
BLINE_OUT_L
MIC2
NC
MICPWR
BLINE_OUT_R AGND +5VA