Specifications

IPIBL-SI 11
5. Jumpers
1. Clear CMOS RAM (3-pin CMOS)
ThisjumperallowsyoutocleartheRealTimeClock(RTC)RAMin
CMOS.YoucancleartheCMOSmemoryofdate,time,andsystemsetup
parametersbyerasingtheCMOSRTCRAMdata.Theonboardbutton
cellbatterypowerstheRAMdatainCMOS,whichincludesystemsetup
informationsuchassystempasswords.
ToerasetheRTCRAM:
 1. TurnOFFthecomputerandunplugthepowercord.
 2. Movethejumpercapfrompins1-2(Normal)topins2-3(ClearCMOS)
 Keep the cap on pins 2-3 for about 5�10 seconds, thenKeepthecaponpins2-3forabout5�10seconds,then
 movethecapbacktopins1-2.
 3. PlugthepowercordandturnONthecomputer.
 4. Holddownthe<F10>keyduringthebootprocessandenterBIOS
 setuptore-enterdata.
ExceptwhenclearingtheRTCRAM,neverremovethecapfromthedefault
position.Removingthecapwillcausesystembootfailure!
2. BIOS Recovery (3-pin ROM RECOVERY)
ThisjumperallowsyoutoenableordisabletheManageabilityEngine
(ME)functioninBIOSrecovery.Setthejumpertopin1-2toenabletheME
function.Removethejumpercaptodisablethisfunction.
IPIBL-SI Clear CMOS RAM
R
IPIBL-SI
CMOS
Normal Clear CMOS
(Default)
2 3
1 2
IPIBL-SI BIOS Recovery Setting
R
IPIBL-SI
ROM_RECOVER
Y
Enabled Disabled
(Default)
2 3
1 2