Specifications

IPIBL-SI 7

3.3 Removing a DDR2 DIMM

Follow these steps to remove a DIMM.

1. Simultaneouslypresstheretaining

clipsoutwardtounlocktheDIMM.

2. Remove the DIMM from the socket.

• ADDR2DIMMiskeyedwithanotchsothatittsinonlyonedirection.Do

not force a DIMM into a socket to avoid damaging the DIMM.

• TheDDR2DIMMsocketsdonotsupportDDRDIMMs.DonotinstallDDR

DIMMs to the DDR2 DIMM sockets.

SupporttheDIMMlightlywith

yourngerswhenpressingthe

retainingclips.TheDIMMmight

getdamagedwhenitipsout

with extra force.

DDR2 DIMM notch

3.2 Installing a DDR2 DIMM

UnplugthepowersupplybeforeaddingorremovingDIMMsorother

systemcomponents.Failuretodosocancauseseveredamagetoboththe

motherboard and the components.

ToinstallaDIMM:

1. Unlock a DIMM socket by

pressing the retaining clips

outward.

2. Align a DIMM on the socket

suchthatthenotchontheDIMM

matches the break on the socket.

3. Firmly insert the DIMM into the

socketuntiltheretainingclips

snap back in place and the DIMM

is properly seated.

Unlocked retaining clip

DDR2 DIMM notch