User Guide
Table Of Contents
- Safety warnings and precautions
- Important safety instructions
- Package contents
- Setting up the display
- Parts of the display and their functions
- Connection
- Connecting audio/video signals
- Connecting the VGA input
- Connecting the YPbPr component video input
- Connecting the S-Video input
- Connecting the composite video (AV) input
- Connecting the DVI-D digital input
- Connecting the HDMI digital input
- Connecting the DisplayPort (DP) digital input
- Connecting external speakers
- Connecting multiple displays
- Connecting power
- Connecting audio/video signals
- Basic operations
- Network connection
- The OSD (On-Screen Display) menu
- Viewing multimedia contents
- Product information
- Troubleshooting
Network connection32
Alert report - voltage error
If a fluctuation in DC power supply to the display’s internal components (scaler IC and
backlight) occurs, a voltage error alert report will be generated and sent to the specified
recipient, and the display will turn off automatically. Below is an example of the format and
content of the report.
If a voltage error alert occurs, consider the following measures:
• Check if there are any loose connections between power cables and sockets.
• Make sure that the power supply is not accidentally turned off (if the power supply device/
outlet has a switch)
Voltage Error
[Display]
Model Name: (Model name of the display)
Serial No.: (Serial number of the display)
[STATUS]
Power Status: Power On
Video Source: HDMI
PAP Enable: Off
[Network]
IP Address: xx.xx.xx.xx
Subnet Mask: xx.xx.xx.xx
Gateway: xx.xx.xx.xx
Primary DNS: xx.xx.xx.xx
Secondary DNS: xx.xx.xx.xx
MAC Address: xx:xx:xx:xx:xx:xx
[Other Information]
Scaler F/W Version: x.x
Lan F/W Version: x.xx Rev x
Operation: 0000008H