User Guide
Table Of Contents
- Safety warnings and precautions
- Important safety instructions
- Package contents
- Setting up the display
- Parts of the display and their functions
- Connection
- Connecting audio/video signals
- Connecting the VGA input
- Connecting the YPbPr component video input
- Connecting the S-Video input
- Connecting the composite video (AV) input
- Connecting the DVI-D digital input
- Connecting the HDMI digital input
- Connecting the DisplayPort (DP) digital input
- Connecting external speakers
- Connecting multiple displays
- Connecting power
- Connecting audio/video signals
- Basic operations
- Network connection
- The OSD (On-Screen Display) menu
- Viewing multimedia contents
- Product information
- Troubleshooting
Connection14
Connection
Connecting audio/video signals
Pay attention to the following notes when you connect cables:
• Please turn off all devices.
• Familiarize yourself with the audio/video ports on the display and the devices you want to
use. Be aware that incorrect connections may adversely affect picture quality.
• Do not remove cables from the ports by pulling the cable itself. Always grasp and pull the
connectors at the end of the cable.
• Ensure that all cables are fully inserted and firmly seated.
Connecting the VGA input
1. Connect the VGA IN jack on the display to the VGA output jack on a computer using the
supplied D-Sub (15-pin) cable.
2. Connect the computer’s audio output jack to the AUDIO IN (AUDIO1) jack on the
display using a suitable audio cable. To select an appropriate audio source, see "Audio
Source" on page 39 for details.
3. To view images from this input, press the VGA button on the remote control, or select
VGA from the source selection bar.
Note:
• The audio cable is not supplied and should be purchased separately.
RS-232C-OUT
RS-232C-IN
D-Sub (15-pin) cable Audio cable
Computer