User Guide
Table Of Contents
- Safety warnings and precautions
- Important safety instructions
- Package contents
- Setting up the display
- Parts of the display and their functions
- Connection
- Connecting audio/video signals
- Connecting the VGA input
- Connecting the YPbPr component video input
- Connecting the S-Video input
- Connecting the composite video (AV) input
- Connecting the DVI-D digital input
- Connecting the HDMI digital input
- Connecting the DisplayPort (DP) digital input
- Connecting external speakers
- Connecting multiple displays
- Connecting power
- Connecting audio/video signals
- Basic operations
- Network connection
- The OSD (On-Screen Display) menu
- Viewing multimedia contents
- Product information
- Troubleshooting
Parts of the display and their functions 13
Using the remote control
Installing remote control batteries
Remote control usage tips
• Point and aim the top front of the remote control directly at the display's remote control
sensor window or IR sensor on extender cable when pressing the buttons.
• Do not let the remote control become wet or place it in humid environments (like
bathrooms).
• If the display’s remote control sensor is exposed to direct sunlight or strong light, the
remote control may not operate properly. In this situation, change the light source, readjust
the angle of the display or operate the remote control from a location closer to display’s
remote control sensor.
1. Open the remote control battery compartment cover.
2. Insert the supplied batteries ensuring that the positive
and negative marked battery terminals match the (+)
and (-) marks in the battery compartment.
Note:
• The supplied batteries are provided for your convenience so that
you can operate the display straight away. You should replace
them as soon as possible.
3. Refit the battery compartment cover.
Max. 10 m
(32.8 feet)