User Guide

78 ASUS PCI-SC875 User’s Manual
IX. SCO UNIX DRIVERS
k. The system prompts to update the SCSI configuration file. Type y and
press Enter. A prompt appears to configure a CD-ROM/TAPE
installation device. Unless this is desired, type n and press Enter. A
prompt appears to add a high-sierra file system. Type y and press Enter.
The system displays the High Sierra/ISO9600 file system Configuration
Program menu. Select option 1 to add high-sierra and press Enter. The
system updates the SCSI configuration file and returns to the CD-ROM
Configuration Program menu. Type q and press Enter to terminate the
CD-ROM Configuration Program menu.
l. A prompt appears to create a new kernel. Type n (as this is done later) and
press Enter.
6 Rebuilding the Kernel.
a. The system now returns to the CAM3 main menu. Select option 3 to
relink UNIX and press Enter.
b. A prompt appears asking to rebuild the kernel. Type y and press Enter.
The kernel is now linked, which takes a few minutes. Messages appear
while the kernel is linking.
c. When the kernel is rebuilt, the system prompts as to whether this kernel is
to boot by default. Type y and press Enter.
d. The system prompts whether to rebuild the kernel environment. Type y
and press Enter. When the CAM3 main menu appears, type q and press
Enter.
e. To activate the new kernel the you must reboot the system. Type the
command: reboot
Press Enter.
f. Press Enter at the Boot: prompt and the new kernel loads.
g. Log in as usual.
IX. SCO UNIX
(Installation)