User's Manual
Table Of Contents
- Safety information
- Product introduction
- Basic Installation
- BIOS setup
- Software support
- RAID support
- Multiple GPU support
- Appendices
ASUS SABERTOOTH 990FX R2.0
4-37
Chapter 4
4.3.12 MyLogo2
MyLogo2 allows you to customize the boot logo, which is the image that appears on the
screen during the Power On Self Tests (POST).
Launching ASUS Update
To launch MyLogo2, click Update > MyLogo on the AI Suite II main menu bar.
Using MyLogo
Select the option that you want to use to update your boot logo, click Next and follow the
instructions below.
Change the boot logo of a downloaded BIOS le and update (or do not update) this BIOS to
the motherboard
1. From the BIOS le eld, click Browse to locate the BIOS le.
2. From the Picture File eld, click Browse the image for your boot logo, then click Next.
++E8042_SABERTOOTH_990FX_R2.0_V237 37 9/1/13 3:34:52 PM