E506 S370 Series CPU Cards Installation Guide ®
Introduction The ASUS S370 Series CPU cards allow Slot 1 motherboards to accept socket 370 processors with Front Side Bus running at up to 133MHz. The ASUS S370 Series CPU cards support both Coppermine and Celeron processors to give Slot 1 motherboard owners an inexpensive way to upgrade their Pentium II/III computers using lower costing socket 370 processors. Since socket 370 processors are designed on the Pentium II/III design, the only difference is the package form factor.
S370-133 CPU Card ASUS S370-133 CPU Card (standard model) • 133MHz FSB Coppermine/Celeron Processor Support • Better Support with Full Retainer CPU Voltage Jumpers Socket 370 Retainer Fin Slot 1 Compatible Connector ASUS S370 Series Installation Guide 3
S370-L CPU Card ASUS S370-L CPU Card (for smaller cases) • 133MHz FSB Coppermine/Celeron Processor Support • Low Profile CPU Voltage Jumpers Socket 370 Retainer Fin Slot 1 Compatible Connector 4 ASUS S370 Series Installation Guide
Windows 98 Using the S370 Series CPU Cards The general procedure for using the ASUS S370 Series CPU cards: 1. Check the voltage setting for your socket 370 processor using the jumpers on the card if necessary. For current socket 370 processors, the default setting should be used. 2. Install the socket 370 processor. Installation of socket 370 processors is exactly like socket 7 processors. Lift the brown lever to 90° to install the processor and lower the brown lever to lock the processor. 3.
Setting up the S370 Series CPU Cards Setting the CPU voltage is not necessary for current socket 370 processors. If required, your socket 370 processor should have its voltage requirement printed on its surface or documentation. If no voltage is indicated or you are not sure, use the “CPU Def.” setting as shown below. Notice that JP6 should be set for the S370-133 CPU card to distinguish between Coppermine and Celeron processors. The S370-L CPU card can automatically distinguish these two types of CPU.
Setting up the S370 Series CPU Cards For S370-133 CPU Card 1 2 3 1 2 3 JP6 JP6 Using Coppermine Processor (Default) Using Celeron Processor 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 JP1 JP2 JP3 JP4 JP5 1.50Volts 1.55Volts 1.60Volts 1.65Volts 1.70Volts 1.75Volts 1.80Volts 1.85Volts 1.90Volts 1.95Volts 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 JP1 JP2 JP3 JP4 JP5 2.00Volts 2.05Volts 2.10Volts 2.20Volts 2.30Volts 2.40Volts 2.50Volts 2.60Volts CPU Def.
® S370 Series CPU Cards P/N 15-xxxxxxxxx
