User Manual
7
1.3 Your wireless router
USB 3.0 port
Insert a USB 3.0 device such as a USB hard disk or a USB flash drive into this port.
Insert your iPad’s USB cable into this port to charge your iPad.
Power LED
O: No power.
On: Device is ready.
Flashing slow: Rescue mode
5GHz LED
O: No 5GHz signal.
On: Wireless system is ready.
Flashing: Transmitting or receiving data via wireless connection.
2.4GHz LED
O: No 2.4GHz signal.
On: Wireless system is ready.
Flashing: Transmitting or receiving data via wireless connection.
WAN (Internet) LED
Red: No IP or no physical connection.
On: Has physical connection to a wide area network (WAN).
LAN 1~8 LED
O: No power or no physical connection.
On: Has physical connection to a local area network (LAN).
USB 3.0 LED (front)
O: No power or no physical connection with a USB device.
On: Has physical connection with a USB device.
3.0
WiFi
LED