Quick Start Guide

RT-AX86U Pro
Wireless-AX5700 Dual-band Gigabit Router
Quick
Start Guide
Hardware Explanations
I/O Ports Overview LED Lights Overview
2.5G Port WAN Type Setup Steps
Prepare your Router
01
Connect the modem to the 2.5G port with a network cable.
DC Power adapter DC Output: +12V with 3.0A current
DC Output: +19.5V with 2.31A current
Operating Temperature 0~40
o
C Storage 0~70
o
C
Operating Humidity 50~90% Storage 20~90%
Specications:
One Router Setup Steps
Prepare your Modem
01
1
Unplug the power of cable / DSL modem. If it
has a battery backup, remove the battery.
5
[App] Launch ASUS Router App and follow the
instructions to complete the setup.
WE SUGGEST...
Modem back
Unplug
Install your Router
02
1
Plug the adapter into the DCIN port, and press the Power switch.
2
Connect your modem to WAN port at the back side of the router with the
network cable provided.
3
Power on the modem. Plug modem to the power
outlet and power on.
Modem back
4
Check the modem LED lights to ensure the connection is active.
If you are using DSL for internet,
you will need your username
/ password from your Internet
service provider (ISP) to properly
congure your router.
Modem front
– Or via web browser
3
[Wired] Connect your PC
to LAN port at the back
side of the router using
an additional network
cable.
[Wireless] Connect to the network with
default SSID shown on the product label on
the back side of your router “ASUS_XX”.
Login and Connect – Setting to 2.5G WAN under factory default settings
02
1
[ASUS Setup Wizard] Select “manual setting”.
2
[ASUS Setup Wizard] Select “2.5G Ethernet”, then follow the instructions to
complete the setup of SSID and login information.
4
[Wired / Wireless] Open a web browser.
You will be redirected to the ASUS Setup Wizard. If not, navigate to
http://router.asus.com.
Follow the instructions to
complete the setup.















– Via app
3
[App] On your iOS or Android mobile device, go
to the app store, search forASUS Router, and
download the app.
4
[App] On your iOS or Android mobile device, tapSettings > Wi-Fi, connect
to the default network SSID shown on the product label on the back side of
the router. Or scan the QR code on the product label to connect the default
network SSID.
* XX refers to the last two digits
of MAC address. You can nd it
on the label on the back of your
router.

_



LAN WAN 2.5G 2.4GHz 5GHz POWERWPS
2
The power LED will light up when the hardware is ready.
DCIN port
LAN ports 1-4
WPS button
WAN port
Reset button
2.5G port
USB 3.2 Gen 1 port
Power switch
LED on/o button
USB 2.0 port