Quick Start Guide

RT-AX1800
Wireless-AX1800 Dual-band
Gigabit Router
Quick Start
Guide
Hardware Explanations
DC Power adapter DC Output: +12V with 1A current
DC Output: +12V with 2A current
Operating Temperature 0~40
o
C Storage 0~70
o
C
Operating Humidity 50~90% Storage 20~90%
Specications:
One Router Setup Steps
Prepare your Modem
01
1
Unplug the power of cable / DSL modem. If it has a
battery backup, remove the battery.
5
[App] Launch ASUS Router App and
follow the instructions to complete the
setup.
WE SUGGEST...
Modem back
Unplug
Install your Router
02
1
Plug the adapter into the DCIN port, and press the Power
switch.
2
Connect your modem
to WAN port at the
back side of the router
with the network cable
provided.
3
Power on the modem. Plug modem to
the power outlet and power on.
Modem back
4
Check the modem LED lights to ensure the connection is active.
If you are using DSL for internet, you
will need your username / password
from your Internet service provider
(ISP) to properly configure your router.
Modem front
– or via Web Browser
3
[Wired] Connect your PC to LAN port at the back side of the
router using an additional network cable.
[Wireless] Connect to the network with default SSID shown on the product label on the back side
of your router “ASUS_XX”.
4
[Wired / Wireless] Open a web browser.
You will be redirected to the ASUS Setup Wizard. If not, navigate to http://router.asus.com.
Follow the instructions to complete the setup.



– via App
3
[App] On your iOS or Android mobile device, go to the
app store, search forASUS Router, and download the
app.
4
[App] On your iOS or Android mobile device, tapSettings > Wi-Fi,
connect to the default network SSID shown on the product label on
the back side of the router. Or scan the QR code on the product label
to connect the default network SSID.
* XX refers to the last two
digits of MAC address.
You can find it on the
label on the back of your
router.

_



2
The power LED will light up when the hardware is ready.
WPS button
Reset button
Power switch
Power (DCIN) port
WAN (Internet) port
LAN 1-4 ports
I/O Ports Overview
2.4GHz WAN (Internet)
LAN
5GHz Power
LED Lights Overview