User’s Manual
Table Of Contents
- About this guide
- Notices
- Safety information
- Chapter 1: Product introduction
- Chapter 2: Hardware setup
- Chapter 3: Installation options
- Chapter 4: Motherboard information
- Chapter 5: BIOS setup
- Chapter 6: RAID configuration
- Chapter 7: Driver installation
ASUS RS720QA-E6/RS12, RS724QA-E6/RS12 6-3
6.2 FastBuild Utility
The FastBuild Utility allows you to create a RAID 0, RAID 1, or RAID 5 set from
Serial ATA hard disk drives that are connected to the Serial ATA connectors
supported by the Promise RAID.
To enter the FastBuild Utility:
1. Install all the Serial ATA hard disk drives at Red SATA Connector.
2. Turn on the system.
3. During POST, press <Ctrl> + <F> to enter the utility main menu.
The RAID BIOS setup screens shown in this section are for reference only and
may not exactly match the items on your screen.
Press 1..4 to Select Option [ESC]Exit
FastBuild (tm) Utility (c) 2004-2010 Promise Technology, Inc.
View Drive Assignment .......[ 1 ]
LD View / LD Dene Menu .....[ 2 ]
Delete LD Menu ..............[ 3 ]
Controller Conguration .....[ 4 ]
[ Main Menu ]
[ Keys Available ]