User’s Manual
Table Of Contents
- About this guide
- Notices
- Safety information
- Chapter 1: Product introduction
- Chapter 2: Hardware setup
- Chapter 3: Installation options
- Chapter 4: Motherboard information
- Chapter 5: BIOS setup
- Chapter 6: RAID configuration
- Chapter 7: Driver installation
ASUS RS720QA-E6/RS12, RS724QA-E6/RS12 5-17
MemoryConguration
Rank Interleaving [Auto]
Allows you to set the rank memory interleaving setting.
Conguation options: [Disabled] [Auto]
Node Interleaving [Disabled]
Allows you to set the node memory interleaving setting.
Conguation options: [Disabled] [Auto]
Channel Interleaving [Auto]
Allows you to set the channel memory interleaving setting.
Conguation options: [Disabled] [Auto]
CS Sparing Enable [Disabled]
Allows you to reserve a spare memory rank in each node.
Conguation options: [Disabled] [Enabled]
Bank Swizzle Mode [Enabled]
Allows you to enable or disable the bank swizzle mode.
Conguation options: [Disabled] [Enabled]
ECCConguration
BIOS SETUP UTILITY
Advanced
Memory Conguration
Bank Interleaving [Auto]
Node Interleaving [Disabled]
Channel Interleaving [Auto]
CS Sparing Enabled [Disabled]
Bank Swizzle Mode [Enabled]
BIOS SETUP UTILITY
Advanced
ECC Conguration
ECC Mode [Basic]
DRAM ECC Enable [Enabled]
DRAM SCRUB REDIRECT [Disabled]
4-Bit ECC Mode [Enabled]
DRAM BG Scrub [Disabled]
Data Cache BG Scrub [Disabled]
L2 Cache BG Scrub [Disabled]
L3 Cache BG Scrub [Disabled]
ECC Mode [Basic]
Disables or sets the DRAM ECC mode that allows the hardware to report and
correct memory errors.
[Disabled] Disables the DRAM ECC mode.
[Basic] Set to [Basic] to adjust ECC mode automatically.
[Good] Set to [Good] to adjust ECC mode automatically.